Nexo NUAR User Manual

Page 65

Advertising
background image

MENU DESCRIPTION

Pin Name

In/Out

Meaning when set to 0

(Default)

Meaning when set to 1

GPInput 1

In

Power amp can start

Do not start power amp

GPInput 2

In

Analog input unmuted

Analog input muted

GPInput 3

In

Digital input muted

Digital input unmuted

GPInput 4

In

Scene 1 is recalled

Scene 2 is recalled

GPInput 5

In

NXAMP is ON

NXAMP is in Stand-by

GPOutput 1

Out

Power amp has started

Power amp not started

GPOutput 2

Out

Reflects the GPInput 2 status

GPOutput 3

Out

Reflects the GPInput 3 status

GPOutput 4

Out

Reflects the GPInput 4 status

GPOutput 5

Out

CH 1 no current out

CH 1 current out

GPOutput 6

Out

CH 2 no current out

CH 2 current out

GPOutput 7

Out

CH 3 no current out

CH 3 current out

GPOutput 8

Out

CH 4 no current out

CH 4 current out


When starting, if GPIO is set to mode 2, the NXAMP will wait that its GPInput1 pin goes

‘Low’ to start the amplifier part (big power supplies). Once started, it will put its GPOutput1

pin ‘Low’ also, so several amplifiers can be linked together.

If GPInput2 is ‘High’, the analog inputs will be muted. If GPinput2 is ‘Low’, the analog

inputs will be unmuted.

If GPInput3 is ‘High’, the digital inputs will be unmuted. If GPinput3 is ‘Low’, the digital

inputs will be muted.

If GPInput4 is ‘High’, Saved Scene number 2 will be recalled. IF GPInput 4 is ‘Low’, Saved

Scene number 1 will be recalled. Warning: Any setup can be recalled, regardless of the

loudspeaker family.

If GPInput5 is ‘High’, Amplifier will go to Stand-by mode. If GPinput5 is ‘Low’, Amplifier will

go back to running mode.

GPOutput1 has been described above.

GPOutput2 reflects the GPInput2 (with a small delay and without glitches).

GPOutput3 reflects the GPInput3 (with a small delay and without glitches).

GPOutput4 reflects the GPInput4 (with a small delay and without glitches).

GPOutput5 to 8 reflects the "Signal" LED on the front panel (meaning current flowing on

the output). It will be possible to select a threshold in a next release (a Pilot Tone

generator will be implemented also).

PAGE 65 OF 140

Advertising
This manual is related to the following products: