Asio to nxamp – Nexo NUAR User Manual

Page 91

Advertising
background image

NXES104 EXPANSION BOARD, REMOTE CONTROL AND ASIO DRIVER

ASIO to NXAMP

In this mode the four digital inputs of the NXES104 board are not fed by an Ethersound™

compatible device on the IN our OUT port, but from a computer connected directly or

through a LAN on the Remote ES100 port of the NXES104, running the ASIO streamer

software.

In that mode, the “Ethersound” title on the four digital input meters is replaced by “ASIO”,

and the Ethersound™ I/O Patch of the NXAMP becomes unavailable.

NB: Although remote control of the NXAMP can be done from the Ethersound™ IN port or

from the Remote ES100 port, streaming ASIO can only be done from the Remote ES100

port.

PAGE 91 OF 140

Advertising
This manual is related to the following products: