Nexo NUAR - Manual (Page 51)

MENU DESCRIPTION
Custom config
When entering the Custom config menu, the first display shows the current setup for the
selected output (including speaker name, variant and crossover points(s) if available).
You can display the current setup information for each output by depressing the
corresponding ‘Select’ button. If you want to change a setup for one output, just press the
‘Edit’ button.
First step is to select the Serie (i.e. family) by turning the wheel (for example here, the PS
Serie). You can then choose the speaker model among this Serie.
In the above example, the PS15R2 has been selected. You can now choose between
normal mode and bridge mode for this speaker.
PAGE 51 OF 140