Asio to nxamp and ethersound™ network, 22) scene, Cene – Nexo NUAR User Manual
Page 92
NXES104 EXPANSION BOARD, REMOTE CONTROL AND ASIO DRIVER
ASIO to NXAMP and Ethersound™ network
This mode is similar to the previous one except that the four audio channels from the ASIO
stream coming on the Remote ES100 port can be routed on the NXAMP on one hand but
also forwarded on the Ethersound™ network on the other hand, thus feeding other amp on
this network (these NXAMP should then be in ASIO mode OFF).
In that mode the NXAMP is no longer an Ethersound™ receiver and becomes a four
channel Ethersound™ source.
(22) Scene
Saving or recalling a scene can be done here pressing the Set button.
Select the Scene of your choice and then choose Save or Recall. The scene and there name
are saved into the NXAMP itself. For each channel the speaker setup information is
displayed.
PAGE 92 OF 140