Nexo NUAR User Manual

Page 52

Advertising
background image

MENU DESCRIPTION

Once the bridge mode has been selected (or not in our example) you will be prompt to

choose among various speaker mode if available. In the case of the PS15R2, the mode is

either “Normal” or “MON” for Monitoring application. Let’s select the standard mode in this

example.

NB: if only one mode is available for the selected speaker, this step will be skipped.

Now the latest part of this custom setup for a specific channel is to choose among the

available crossover, when available. Most passive cabinets and subs offer multiple

crossover options, but HF output for active cabinets usually has just one.

NB: if only one crossover is available for the selected mode, this step will be skipped.

Once the OK button is pressed, the display goes back to the four channel information

display, while the selected speaker for CH1 is recalled into the NXAMP.

NB: If another channel is mandatory linked to the selected one (for example back and front

speakers of a CARDIO speaker) then the next channel will be automatically recalled.

PAGE 52 OF 140

Advertising
This manual is related to the following products: