Nexo NUAR - Manual (Page 62)

MENU DESCRIPTION
To change either the local or the remote control access, press the corresponding ‘Select 2’
(for local control) or ‘Select 4’ (for remote control) button. If the password has not been
entered yet, it will be asked now.
Password ? Control
Prev A_______ Next
If the wrong password is entered, it will be displayed and you can then only go back to
previous menu, which will be still in read-only. If the good password is entered, you then
either go back and edit the previous menu (press ‘Select 4’), or change the current
password (press ‘Select 1’). In this last situation, you will need to enter the new
password.
Password Ok
Change
Back
In the previous menu, you can then press the ‘Select 2’ or ‘Select 4’ buttons and toggle
the Local or Remote access between FREE or LOCKED. If you leave this menu and come
back to this security menu later on, you will need to enter the password again.
GPIO Mode
To access the GPIO Mode menu, go to the Option menu, and select the sub-menu 5.GPIO
mode (see above).
As a reminder, the pinout of the GPIO on the DB-25 connector is given bellow:
PAGE 62 OF 140