Step 3: add a connection – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 10
Advertising
![background image](/manuals/367719/10/background.png)
10
0031510 rev. 003 11/04
The application window appears. A new, empty site called “Home” is
displayed at the top of the Navigation tree. The Connection Wizard starts
to helps you specify the properties of this connection.
STEP 3: ADD A CONNECTION
A connection is simply a COM port on your computer. The Connection
Wizard helps you specify the properties of this connection, including—
• Connection type:
• Direct, for use when the In-Situ data logging device is
attached directly to the PC
• Modem for a dial-up modem
• Spread-Spectrum Radio
SECTION 2: GETTING STARTED
TIP: The first time
you launch the
software, the
Connection Wizard helps
you add a connection to the
“Home” site. If the Wizard
does not start automatically,
select the site and click or
tap Add.
Advertising