In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 46)

46
0031510 rev. 003 11/04
SECTION 8: LOGGING DATA
ADDING A TEST TO A DEVICE: THE TEST WIZARD
1. Click or tap Tests in the Navigation tree.
2. Click or tap Add. The Test Wizard starts. The choices are discussed
below.
3. When you finish the Wizard, the information is written to the device and
the display is updated.
1
2
MP TROLL 9000 TIP: Before the Test Wizard starts, you will be
asked to specify whether the cable is vented or non-vented. Cable
venting is essential for accurate barometric pressure measurement.
In the absence of vented cable, a substitute barometric pressure
value may be supplied. For more information, please refer to
Section 9 of the MP TROLL 9000 Operator’s Manual.