7 profiling, Profiler features, Section 7 has details on profiling – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 39: Pane. refer to, Section 7
39
WIN-SITU 4.0 USER’S GUIDE
0031510 rev. 003 11/04
7 PROFILING
The Profiler delivers instant real-time readings on all available channels.
Profiler readings are continuously updated as long as the Profiler is
running. This provides a convenient means for quick characterization of
surface waters using a hand-held controller running Pocket-Situ.
PROFILER FEATURES
• Auto detect—the software automatically identifies all properly
connected sensors
• Continuously updated readings from all available channels
• Optional data logging to the connected PC
• Optional start device in Profiler mode
• Optional selectable Profiler interval (2-60 seconds)
You will need—
• miniTROLL or MP TROLL 9000
• Quick-Connect Submersible cable
• ComIT or comm cable
• PDA running Pocket-Situ
TIP: Pocket-Situ
screens are shown
in this section.
Win-Situ on a laptop PC
may also be used for
Profiling.