In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 34)

34
0031510 rev. 003 11/04
EDITING THE PRESSURE PARAMETER
The Parameter Wizard can help you configure a pressure channel to
display measurements just as you want them. The specified settings are
easily changed from one mode to another, and most choices can be
redone or undone later, when viewing test data.
1. In the Navigation tree, select a pressure parameter.
2. In the Information pane, click or tap Edit.
The choices are discussed below.
3. When you finish the Wizard, the information is sent to the device and
the display is updated.
NAME (OPTIONAL)
A default name is supplied for display in the Navigation tree and test data
files. If you choose, you can enter a custom name.
1
2
SECTION 5: PRESSURE SETUP
If the device is
running a test, the
Edit button will not
be available.