Step 4: find devices – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 11
![background image](/manuals/367719/11/background.png)
11
0031510 rev. 003 11/04
• Devices connected: Select “one” to speed up connection to a
single device, or “more than one” for a network.
• Port: Select the COM port (RS232 serial port) to which the device
is attached. For a Modem connection, enter the phone number—up
to 40 characters; a comma designates a pause.
• Baud Rate: Select any rate (19,200 is the default); baud rates are
automatically synchronized between devices and the host PC.
• Name (optional): A default connection name is suggested.
• To have the wizard connect automatically, be sure the option
Connect and find devices on “Finish” is checked.
STEP 4: FIND DEVICES
1. If you requested Win-Situ to connect and find devices, go to step 3.
2. To connect manually, click Find. Or double-click the connection.
SECTION 2: GETTING STARTED
To connect manually,
click here
TIP: You will use
this one
connection setting
regardless of the number of
individual instruments to
which you will be
connecting, so there is no
need to create multiple
connection settings.