In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 14)

14
0031510 rev. 003 11/04
THE NEXT STEP
The next step depends on the connected device and how you intend to
use it.
• Quick-Cal the water-quality sensors. Complete instructions are given in
Section 3 of the Multi-Parameter TROLL 9000 Operator’s Manual.
• Set up the pressure parameter channel to display the type of readings
you want. See Section 5 for information.
• Section 7 has details on profiling .
• See Section 8 for details on programming your device to collect data.
EXITING THE SOFTWARE
WIN-SITU
Select Exit from Win-Situ’s File menu.
POCKET-SITU
Tap the Home site in the Navigation tree., then tap Exit in the command
bar at the bottom of the screen.
If changes have been made to the site, Win-Situ or Pocket-Situ will ask if
you want to save the modifications. Such modifications may include
adding or deleting a connection as well as measurement units and other
preferences, which are saved with the site.
• Select Yes to save the current settings.
• Select No to abandon the changes.
For more information on settings, see Choosing Measurement Units and
Other Preferences in Section 4.
SECTION 2: GETTING STARTED
CAUTION: Be
sure to Exit
Pocket-Situ as
described here after each
session. This releases
allocated resources used by
Pocket-Situ, so that the
communications port will be
available the next time you
connect to an In-Situ
instrument, or to a desktop
PC using ActiveSync with a
serial connection.