In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 56)

56
0031510 rev. 003 11/04
CLONING A TEST
The Clone function lets you copy all the elements of an existing test—the
test name, selected channels, measurement schedule and interval—
without having to define a new test “from scratch.” You can clone a
pending test or a completed test.
1. With the miniTROLL connected to a host PC and selected in the
Navigation tree, click or tap Tests.
2. In the Information pane, select a test to clone.
3. Click or tap Clone to preview the test definition. The Wizard will still
present all the screens, but you can just click Next to get through them
quickly (or make any changes you want).
4. Click Finish to end the wizard. The information will be sent to the
device and the new test will appear in the Navigation tree.
SECTION 8: LOGGING DATA
TIP:The proposed
start type for a
cloned test will
always be Manual,
regardless of the start type
of the original test. This is to
avoid scheduling a test to
start in the past.