Stabilization readings – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 86
86
SECTION 11: FLOW-SENSE WIZARD
rev. 003 11/04
6. Ensure the pump is on, then click or tap Start to begin the stabilization
readings.
STABILIZATION READINGS
The next screen shows for each parameter:
• Reading: the current reading
• Change - Val: difference between the maxium and minimum
over the last 3 readings OR
• Change - %: difference between the current reading and the
third reading back (two readings ago) expressed as a
percentage
• Target specified earlier in the Wizard (shown for Values)
To view this data in graphical form, click Graph.
Time the Wizard started
Elapsed time
No. of readings taken
Countdown to next
reading
TIP: In any view,
the Back button
may be used to
change the input on any
earlier screen. The program
will pause, then resume
when you are ready.