In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 33
Advertising
33
0031510 rev. 003 11/04
1. With the device connected to a host PC and selected in the Navigation
tree, click or tap Pressure in the Parameters list. If the pressure
channel is set up to display in Depth or Level mode, use the Edit
function to set it to Pressure Head mode.
2. Click or tap Calibrate. You will be prompted to ensure the device is in
air.
3. When the device is in air, click Yes.
The current pressure reading will be set to zero. To check this, take a
reading with the “Read” button.
SECTION 5: PRESSURE SETUP
1
2
Advertising