In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 77)

77 SECTION 11: FLOW-SENSE WIZARD
rev. 003 11/04
USING THE FLOW-SENSE WIZARD
START THE SOFTWARE
Launch Win-Situ or Pocket-Situ.
If you have not used the software before, take a moment to specify a
connection type, COM port, and baud rate. Refer to Step 3 in Section 2
(Getting Started) of this guide for specifics.
LAUNCH THE FLOW-SENSE WIZARD
Select one of the following ways to launch the Flow-Sense Wizard:
• Select the Flow-Sense Wizard from the Tools menu in Win-Situ (not
available in Pocket-Situ)
• Select the Flow-Sense Wizard in the Navigation tree. Click or tap Start
in the Information pane.
Select the Wizard
Click Start
1
2
TIP: Win-Situ
screens are
illustrated here.
The Pocket-Situ interface is
similar, with the Navigation
tree at the top of the screen
and the Information pane
below it.