In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 16)

16 WIN-SITU 4.0 USER’S GUIDE
0031510 rev. 003 11/04
3 THE NAVIGATION TREE
Win-SItu and Pocket-Situ use the familiar “navigation tree” to display your
instrument network. The tree appears on the left of the screen in Win-Situ,
at the top of the screen in PocketSitu. The remainder of the screen is an
Information pane with details about the “node” selected in the tree.
NAVIGATION TREE NODES
At the top of the tree is the “Home” site (the host computer). Below this is
the Flow-Sense Wizard (see Section
11), then the Data Folder
containing tests that have
been extracted from the
device to the host
computer. This is followed
by one or more connections
(COM ports), and then one or
more devices (e.g., miniTROLL,
MP TROLL 9000) accessible through each COM port. The Device node is
further expandable to show the parameters the device can measure and
the tests in the device memory. The symbol + means a node can be
expanded to show more nodes.
Site
Flow-Sense Wizard
Data Folder
Connection
Device
Parameters
Tests