Other test operations – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 51
Advertising
![background image](/manuals/367719/51/background.png)
51
0031510 rev. 003 11/04
OTHER TEST OPERATIONS
There are six basic test operations:
• Add...—programs the instrument to collect data. See the first part of
this section for details.
• Edit...—allows you to change the pre-programmed test setup before
the test runs. Editing a test launches the Test Wizard, and the prompts
are the same as when adding a test.
• Start—starts the selected test if it has been defined for a manual start.
• Stop—stops a running test.
• Extract—copies the selected test data from the instrument to the host
computer.
• Delete—deletes the selected test from the instrument.
• Clone—makes a copy of the selected test definition setup.
SECTION 8: LOGGING DATA
Advertising