In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 47)

47
0031510 rev. 003 11/04
TEST SETUP PARAMETERS
A complete test definition has five parts. The choices available in each
screen are tailored to reflect your selection in earlier screens.
1. Test Name (Optional)
You may enter up to 16 characters to identify the test. A default name is
proposed. The test name is displayed
• in the Navigation tree
• in the test data file
• in the filename of tests extracted from the device to the Data
Folder on the host PC
2. Parameters to Include
All available parameters will be selected. De-select any channels you do
not want to measure. Remaining choices will be tailored to your selection.
For example, a log test is not available when water-quality parameters are
being measured with an MP TROLL 9000.
SECTION 8: LOGGING DATA