Units – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual
Page 28
![background image](/manuals/367719/28/background.png)
28
0031510 rev. 003 11/04
To display the Preferences window, do one of the following:
• In Win-Situ, select Preferences from the Options menu.
• In Pocket-Situ: Tap the Home site in the Navigation tree, then tap
Setup... in the command bar.
UNITS
Default units are used for the display of data unless you specify other
preferences. To set unit preferences, first display the Preferences window
as explained above.
1. Select the Units tab.
2. In the top of the Units window, select a parameter whose unit you wish
to change.
3. In the bottom of the window, select the unit you want for the highlighted
measurement. Repeat for as many units as you like.
4. Do one of the following:
• Click OK to apply the new units and close the window.
• Click the Settings tab to change other settings.
SECTION 4: SPECIAL ACTIONS