In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 73)

73
0031510 rev. 003 11/04
2. Double-click on “My
Pocket PC.”
3. Browse to the folder
where Pocket-Situ Data
is stored. On many
PDAs this will be in a
folder called “Storage
Card” or “SD Card.” On
the Rugged Reader,
look in Built-in Storage. Open the Pocket-Situ Data folder (double-click)
to display a listing of your
extracted data (.bin) files.
4. Right-click the file(s) you
want to transfer and
select Copy or Cut.
Selecting Cut will remove
the data file from the
PDA.
5. Open Windows Explorer
for the desktop PC and
navigate to the folder where you want to place the data file(s). When
the cursor is in the desired folder, right-click, and select Paste.
We recommend placing the files in the following locations to ensure
that they will be displayed properly in the Data Folder branch of the
Win-Situ Navigation tree.
Test data files Data folder in the folder where Win-Situ is
installed (normally, C:\Win-Situ\Data)
Low flow files LowFlow subfolder of the Data folder
SECTION 10: POCKET-SITU
2
4
TIP: Calibration
reports in HTML
format are located
in the Calibration Reports
folder. Low flow files are
located in the LowFlow
subfolder under the Data
folder.
TIP: To copy low
flow files from a
desktop PC to a
Pocket PC, reverse this
procedure: (1) Copy the file
in Windows Explorer on the
desktop PC, (2) use
ActiveSync Explorer to
browse to the LowFlow
subfolder under the Data
folder in the folder where
Pocket-Situ is installed on
the PDA, (3) paste the file.
With both Explorers open,
you may “click and drag”
files between them.