In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 55)

55
0031510 rev. 003 11/04
SECTION 8: LOGGING DATA
Win-Situ \ Data \ SN00120 2004-06-18 083000 drawdown.bin
Device serial number
Test start date (yyyy-mm-dd)
Test start time (hhmmss)
Test name
TIP: Win-Situ saves each test to a folder named “Data” in the
folder where Win-Situ is installed. The file structure looks like
this:
File type
TIP: On a PDA, the Pocket-Situ \ Data folder is located
in the device’s non-volatile storage.
DELETING TESTS
Tests are stored in the device memory until you delete them. The Delete
operation permanently removes selected tests from the device, and
reorganizes the memory to optimize future data storage. Depending on
how full the memory is, the process may take several minutes.
1. In the Navigation tree, click or tap Tests.
2. In the Information pane, select one or more tests to delete. To select
multiple tests, hold the CTRL key while selecting. (To display the CTRL
key on the Pocket PC, tap the keyboard symbol in the Command bar.)
3. Click or tap Delete. You will be asked to confirm your selection.
4. After you confirm, the selected test(s) are permanently removed from
the device and the display is updated.
CAUTION: Be
sure to extract the
tests you want to
save before deleting them
from the device. Once a
test is deleted, the data
cannot be retrieved!
TIP: The Delete
procedure can be
used to cancel a
pending scheduled
test.
TIP:If a test is
running in the
device, the Delete
button is not available. You
must stop the running test
before tests can be deleted.
See “Stopping a Test”
above.