KYORITSU 6300 Instruction Manual - Manual (Page 122)

MODEL6300
9. 4
MODEL6300 Section 9 CF card/ Internal memory
Section
9
9-3 Formatting or saving data in CF card/ Internal memory
Ɣ Formatting CF card (FAT16)
Be sure to format the CF card to be used.
<Format procedure>
(1) Confirm that the instrument is off, and place the CF card.
(2) Set the Function switch to
SET UP range. (Instrument is turned on)
(3) Follow the procedure described in “Section 4; Setting 20” and format the
card.
Ɣ Deleting of all files
When deleting all files in the CF card and the internal memory, follow the
procedure below.
* In case of deleting all data in the CF card:
Follow the procedure described in “Section 4; Setting 21” and delete the
data.
* In case of deleting all data in the internal memory:
Follow the procedure described in “Section 4; Setting 22” and delete the
data.
Ɣ Saving data
Measured instantaneous, integration and demand values can be saved to the
CF card or the internal memory in CSV format, which can be edited on
spreadsheet software. File number is given automatically.
File name: 1 F I L E 0 0 1 . C S V
1: Instantaneous value File number (001 ~ 999)
measurement FILE : CF card
2: Integration measurement DATA : Internal memory
3: Demand measurement
For further details, please refer to; “6-4 Saving data” for instantaneous value,
“7-5 Saving data” for integration value and “8-6 Saving data” for demand
value.
NOTE
* Instrument automatically identifies a CF card when it is turned on.
* When a card is inserted, data can be saved in the internal memory.
Please refer to “Setting 19”.