KYORITSU 6300 Instruction Manual - Manual (Page 48)

MODEL6300
4. 22
MODEL6300 Section 4 Setting
Section
4
‣ ‧• ⁈ ‥ •• ⁈ •• ⁈ ‣⁂ ․⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥⁂ …⁉
‧″ ‣• ″ ․ •″ ‧• ″ ‣ •• ″ ․ •• ″ ‧ •• ″ ‣ •• •″
4-3-18 “Setting 18” Reset of demand value
The demand (target / value measurement) value recorded in a previous
demand measurement can be reset as follows.
* Using the Cursor key whilst in the selection screen, select “Setting 18”.
* Press the ENTER key to enter setting change mode.
* On the LCD, “oFF”(not reset) will flicker. Then change it to “on”(reset) with
Cursor key, and press the ENTER key.








NOTE
* This setting is also available on DEMAND range.
For more detailed information, refer to “Section 8: Demand value
measurement” in this manual.
* When the demand value is reset, the integration value will be also reset.
* The default value is always “oFF”.
‣ ‧•⁈ ‧•⁈ ‥• ‥• •⁈ •⁈ •• •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁂ ‥⁉ ‥⁉ ‥ ⁂…⁉ …⁉
‧ ″ ‧ ″ ‣ • ‣ •″ ․ • ․ •″ ‧• ″ • ″ ‣•• ″ • ″ ․•• ″ • ″ ‧• • • •″ ‣• • • ••″
‣ ‧•⁈ ‧•⁈ ‥• ‥• •⁈ •⁈ •• •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁂ ‥⁉ ‥⁉ ‥ ⁂…⁉ …⁉
‧ ″ ‧ ″ ‣ • ‣ •″ ․ • ․ •″ ‧• ″ • ″ ‣•• ″ • ″ ․•• ″ • ″ ‧• • • •″ ‣• • • ••″
any of