KYORITSU 6300 Instruction Manual - Manual (Page 132)

MODEL6300
10. 10
MODEL6300 Section 10 Communication function/ Supplied software
Section
10
10-6 Set up via PC
(1) Connect the instrument and your PC with a USB cord, and set the
Function switch to SET UP range.
(2) Start “KEW POWER PLUS 2”, and click “Setup” on the Main window.
(3) Select the instrument displayed on the “List of detected Power Meters”.
Then click “Connect”.
(4) The window for “MODEL6300 POWER METER SETUP” appears.
When error message appears, check whether USB cord is connected
properly; or the instrument is on and the Function switch is set to
SET UP range or not.