KYORITSU 6300 Instruction Manual - Manual (Page 75)

6. 15
MODEL6300
Section 6 Instantaneous value measurement MODEL6300
‣‧ • ⁈ ‧ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • • ⁈ ‣ ⁂ ‣ ⁂․⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ″ ‣ • ″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • • ″ ‣ • • ″ ․ • • ″ ․ • • ″ ‧ • ‧ •• ″ • ″ ‣ • • • ″ ‣ • • • ″
‣‧ • ⁈ ‧ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • • ⁈ ‣ ⁂ ‣ ⁂․⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ″ ‣ • ″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • • ″ ‣ • • ″ ․ • • ″ ․ • • ″ ‧ • ‧ •• ″ • ″ ‣ • • • ″ ‣ • • • ″
Any of
Pressing the SAVE key displays a screen prompting the user to delete the file
already saved in the internal memory.
To delete the file;
* The message "dAtA not .dEL” (not deleted) is displayed on the screen.
Press the
Cursor key and select "dAtA.dEL” (deleted).
* Then press the ENTER key.
NOTE
* For further details about the capacities of CF card and internal memory,
refer to “Section 9: CF card/ Internal memory” in this manual.
6-4-3 Parameters recorded
Ɣ Parameters Saved (depending on each wiring configuration)
Following parameters are saved.
Measurement/ calculation parameter
Voltage (RMS) Vi : Voltage per phase
Current (RMS) Ai : Current per phase
Active power P : Total active power Pi : Active power per phase
Reactive power Q : Total reactive power Qi : Reactive power per phase
Apparent power S : Total apparent power Si : Apparent power per phase
Power factor PF : Power factor of whole system PFi: Power factor per phase
Frequency f : Frequency of V1
Neutral current In : Neutral Current
* i = 1, 2, 3