KYORITSU 6300 Instruction Manual - Manual (Page 26)

MODEL6300
3. 6
MODEL6300 Section 3 Preparation for measurement
Section
3
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
3-3-3 Battery Operation
This instrument operates either with AC power supply or batteries (typically
for about 7 hours continuous measurement). When AC power supply is
interrupted, the instrument operates on the batteries.
WARNING
Never touch the Power connector, even though it is insulated when the instrument is
operating with batteries.
Measurement screen on each range switches as follows.
<AC power supply-operated> <Battery-operated>
AC power supply mark is displayed Battery mark is displayed
Ɣ Battery condition
Battery mark varies as follows depending on the battery condition.
Mark Description
About 4 to 7 hours autonomy
2 to 4 hours autonomy
0 to 2 hours autonomy
NOTE:
Using the backlight will rapidly
reduce the battery’s autonomy.
Battery is exhausted.
(accuracy of readings cannot be guaranteed)
The following operations should be done not to loose data.
* During instantaneous value measurement (after a file is
opened), close the file and data will be saved.
* During integration/ max demand measurement stop the
measurement and the data will be saved.
NOTE
* The batteries are not in the instrument at the time of purchase. Please insert the
supplied batteries in the instrument. If the instrument will not be in use for a long
period, remove the batteries.
For further details, please refer to “12-2 Battery replacement” in this manual.
* When the instrument is powered by AC power supply, it doesn’t operate with batteries.
* If the AC supply is interrupted and the batteries have not been inserted, the instrument
goes off and all data is lost.
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″