3-9 “setting 09” integration interval – KYORITSU 6300 Instruction Manual User Manual
Page 39
4. 13
MODEL6300
Section 4 Setting
MODEL6300
‣ ‧•⁈ ‥• •⁈ •• ⁈
‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂…⁉
‧ ″
‣ •″
․ •″
‧• ″
‣•• ″ ․•• ″ ‧• •″ ‣• ••″
‣ ‧• ⁈ ‥ ••⁈ • •⁈
‣⁂ ․⁉ ‣⁂ ‥⁉ ‥ ⁂‥ ⁉ ‥ ⁂…⁉
‧″
‣ •″
․• ″
‧ •″
‣ ••″ ․ ••″ ‧• •″ ‣•• •″
4-3-9 “Setting 09” Integration interval
The Integration interval is a preset period of time. Each time this interval
elapses, the data measured (in integration mode) during that interval, is
saved into the CF card or the internal memory.
Setting time
1/ 2/ 5/ 10/ 15/ 20/ 30 sec.
1/ 2/ 5/ 10/ 15/ 20/ 30 min.
1 hour
Default value
30 min.
* Using the
Cursor
key whilst in the selection screen, select “Setting 09”.
* Press the
ENTER
key to enter setting change mode.
* Previous setting (or default value: 30 min.) flickers. Press the
Cursor
key
to select any desired interval.
* Then press the
ENTER
key.
Hour
Minute Second