KYORITSU 6300 Instruction Manual - Manual (Page 99)

8. 1
MODEL6300
Section 8 Demand value measurement MODEL6300
̪ߎߩ㗁ߪᓟᣣޔᏅߒᦧ߃߹ߔޕ
 ઁߩ㗁ߩୃᱜࠍ߅㗿޿޿ߚߒ߹ߔޕ
Set the Function switch to
DEMAND range.
If the Function switch is set in the following positions during Demand
measurement or Demand stand-by mode;
W range : The instantaneous values are displayed.
(see “Section 6: Instantaneous value measurement”)
Wh range : The instantaneous values are displayed.
(see “Section 7: Integration value measurement”)
SET UP range : The settings are displayed.
(see “Section 4: Settings”)
.
Ɣ Indications
Measurement/Calculation items Unit
Target demand value W
Predicted demand value W
Present demand value W
Load factor %
Remaining time for demand interval elapse -
Max. demand value recorded so far W
Date and time when max. demand value was recorded -
LED status indicator
8. Demand value measurement