KYORITSU 6300 Instruction Manual - Manual (Page 72)

MODEL6300
6. 12
MODEL6300 Section 6 Instantaneous value measurement
Section
6
6-4 Saving data (instantaneous values)
Pressing the SAVE key on W range during a measurement saves all the
measured parameters at the instant of saving. This is a manual single step
operation.
Data can be saved to either below two locations:
* CF card : Max. 20 files can be saved.
* Internal memory : Only 1 file can be saved.
Data is saved to a CF card automatically when a CF card has been inserted
before turning on the instrument. If a CF card has not been inserted, data is
automatically saved to internal memory.
6-4-1 Saving Procedure
* Press the SAVE key whilst on the W range .
A File is opened.
* The File number screen appears and the instantaneous measured data is
saved. (A file number is assigned automatically.)
* On the measurement screen, it can be seen that a file is open.
<CF card>
lights up
<Internal memory>
lights up


File number
screen 




Measurement
screen 


‣‧ • ⁈ ‧ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • • ⁈ ‣ ⁂ ‣ ⁂․ ⁉ ․ ⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ‣ •″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • ‣ •• ″ • ″ ․• • ″ • • ″ ‧ • • ‧ • •″ ‣ • • • ″ ‣ • • • ″
‣‧ • ⁈ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • • ⁈ ‣ ⁂ ‣ ⁂․ ⁉ ․ ⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ‣ •″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • ‣ •• ″ • ″ ․• • ″ • • ″ ‧ • • ‧ • •″ ‣ • • • ″ ‣ • • • ″
File No.
‣‧ • ⁈ ‧ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • ⁈ ‣ ⁂ ‣ ⁂․⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ″ ‣ • ″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • • ″ ‣ • • ″ ․ • • ″ ․ • • ″ ‧ • ‧ •• ″ • ″ ‣ • • • ″ ‣ • • • ″
‣‧ • ⁈ ‧ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • • ⁈ ‣ ⁂ ‣ ⁂․⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ″ ‣ • ″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • • ″ ‣ • • ″ ․ • • ″ ․ • • ″ ‧ • ‧ •• ″ • ″ ‣ • • • ″ ‣ • • • ″