KYORITSU 6300 Instruction Manual - Manual (Page 25)

3. 5
MODEL6300
Section 3 Preparation for measurement MODEL6300
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
3-3-2 Error message
This instrument automatically checks the internal circuit immediately after it is
turned on.
If a suspect failure in the internal circuit is detected, the error screen displayed
below will be on for about 2sec. just before all segments are displayed on the
LCD. In this case, refrain from using the instrument and refer to “Section12:
Troubleshooting” in this manual.
CAUTION
Notwithstanding the error screen, the measurement screen will appear and the
instrument will take measurements anyway. However, the accuracy of reading
may be affected.
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
~
Error code (0 ~ 63)