Document Outline

• Safety and operating instructions for drive power converters
• Intended use of the frequency inverter
• Documentation
• Version list
• Publisher
• Table of Contents
• List of illustrations
• List of tables
• 1. General
  • 1.1 Overview
  • 1.2 Delivery
  • 1.3 Scope of delivery
  • 1.4 Safety and installation information
    • 1.4.1 Explanation of labels used
    • 1.4.2 List of Safety and installation information
  • 1.5 Certifications
    • 1.5.1 European EMC Directive
    • 1.5.2 UL and cUL approvals for frequency inverters (CSA)
      • UL- Approval - File No. E171342
      • Supplement for cUL
    • 1.5.3 C-Tick labelling - No. N 23134
    • 1.5.4 RoHS compliant
  • 1.6 Type codes / Device versions
• 2. Assembly and installation
  • 2.1 SK 5xxE, standard version
  • 2.2 SK 5xxE…-CP in ColdPlate version
  • 2.3 External heat sink kit
    • Scope of delivery
    • Dimensions
    • Assembly
  • 2.4 Snap-on mounting rail kit SK DRK1…
    • Scope of delivery
    • Assembly
  • 2.5 EMC Kit
  • 2.6 Brake resistor (BR)
    • 2.6.1 Electrical data, brake resistor
    • 2.6.2 Dimensions of bottom-mounted BR SK BR4
    • 2.6.3 Dimensions, brake resistor chassis SK BR2
  • 2.7 Mains choke SK CI1
  • 2.8 Output choke SK CO1
  • 2.9 Line filter
    • Mains filter SK NHD (up to size 4)
    • Mains filter SK LF2 (size 5 - 6)
    • Mains filter SK HLD (above size 5)
    • Voltage limitation filter SK CIF
  • 2.10 Electrical connections
    • 2.10.1 Wiring guidelines
    • 2.10.2 Adaptation to IT networks
      • Adaptation of sizes 1 - 7
      • Adaptation above size 8
    • 2.10.3 DC-coupling
    • 2.10.4 Electrical connections, power unit
      • Mains connections (X1 – PE, L1, L2/N, L3)
      • Motor cable (X2 - U, V, W, PE)
      • Breake resistor (X2 - +B, -B)
    • 2.10.5 Electrical connections, control unit
      • Terminal block X3, (above size 8: X3.1 and X3.2) - Relay
      • Terminal block X4 – Analog I/O
      • Configuration of analog signals
      • Terminal block X5 – Digital In
      • Terminal block X6 – Encoder
      • Terminal block X7 – Digital I/O
      • Terminal block X8 – Safe pulse lock (not with 115V devices)
      • Plug connector block X9 and X10 – CAN / CANopen
      • Plug connector block X11 – RS485 / RS232
      • Terminal block X12 – 24 VDC input (only size 5 … 7)
      • Terminal block X13 – motor PTC (only size 5 … 7)
      • Terminal block X14 – Universal encoder interface
      • Terminal block X15 – motor PTC and 24V input (above size 8)
  • 2.11 Colour and contact assignments for encoders
    • Incremental encoder
    • Sinus encoder (SIN/COS encoder)
    • Hiperface encoder
  • 2.12 RJ45 WAGO- Connection module
  • 2.13 Setpoint card ± 10V
• 3. Displays and control
  • 3.1 Modular assemblies SK 5xxE
  • 3.2 Overview of technology units
    • Control boxes
    • Interfaces
    • Other optional modules
    • Installing
  • 3.3 SimpleBox, SK CSX-0
    • Features
    • Assembly
    • Connection
    • Control with the SimpleBox
    • Menu structure with the SimpleBox
• 4. Commissioning
  • 4.1 Factory settings
  • 4.2 Minimal configuration of control connections
    • Minimum connections
    • Basic parameters
  • 4.3 KTY84-130 connection (above software version 1.7)
    • Connections (Example SK 500E, analog input 2)
    • Parameter settings (ExampleSK 500E, analog input 2)
  • 4.4 Frequency addition and subtraction via operating boxes
• 5. Parameters
  • Availability of parameters
  • Array parameter display
  • Operating displays
  • Basic parameters
  • Motor data / Characteristic curve parameters
  • Control parameters
  • Control terminals
  • List of possible analog functions of the analog inputs
  • List of possible digital functions of the analog inputs
  • List of possible analog functions of the analog outputs
  • List of possible digital functions of the analog outputs
  • List of the possible functions of digital inputs
  • HTL encoder function (only DIN2/4 )
  • List of possible functions of the relays and digital outputs
  • Additional parameters
  • Positioning
  • Information
• 6. Operating status messages
  • Frequency inverter switch-on block
  • Warning messages
  • Fault messages
  • 6.1 Display of messages
    • LED displays
    • SimpleBox / ControlBox display
    • ParameterBox display
  • 6.2 Messages
    • Fault messages
    • Warning messages
    • Switch-on block messages
• 7. Technical data
  • 7.1 General Data SK 500E
  • 7.2 Electrical data
    • 7.2.1 Electrical data 115V
    • 7.2.2 Electrical data 230V
    • 7.2.3 Electrical data 400V
  • 7.3 General conditions for ColdPlate technology
• 8. Additional information
  • 8.1 Setpoint processing
  • 8.2 Process controller
    • 8.2.1 Process controller application example
    • 8.2.2 Process controller parameter settings
      • Example: SK 500E, setpoint frequency: 50 Hz, control limits: +/- 25%
  • 8.3 Electromagnetic Compatibility (abbreviation: EMC)
    • Class A, Group 2: General, for industrial environments
    • Class A, Group 1 ((C2): Interference suppressed, for industrial environments
    • Class B, Group 1 ((C1): Interference suppressed for domestic, commercial and light industry environments
  • 8.4 EMC limit value classes
    • Wiring recommendations
  • 8.5 Reduced output power
    • 8.5.1 Increased heat dissipation due to pulse frequency
    • 8.5.2 Reduced overcurrent due to time
    • 8.5.3 Reduced overcurrent due to output frequency
    • 8.5.4 Reduced output current due to mains voltage
    • 8.5.5 Reduced output current due to the heat sink temperature
  • 8.6 Operation with FI circuit breakers
  • 8.7 Energy Efficiency
  • 8.8 Standardisation of setpoint / target values
  • 8.9 Definition of setpoint and actual value processing (frequencies)
• 9. Maintenance and servicing information
  • 9.1 Maintenance Instructions
    • Dusty environments
    • Long-term storage
      • Long-term storage for 1 - 3 years
      • Long-term storage for >3 years or if the storage period is not known:
  • 9.2 Repair information
    • 9.2.1 Repairs
    • 9.2.2 Internet information
  • 9.3 Abbreviations
• Key word index