Installing acp bacnet and connecting cables – LG PQNFB17C0 User Manual
Installing ACP BACnet
Installing ACP BACnet and connecting cables
After setting PI485, the ACP BACnet shall be installed in an adequate place, and RS-485 cable
shall be connected for the communication with PI485.
And, Ethernet cable (LAN cable) shall be connected for the connection with internet or AC Man-
To fix the ACP BACnet, the following 2 methods may be used.
Install in DIN RAIL or fix to the wall considering the environment of the site.
If four times the power connector for the connection, as shown by using the right connec-
tion, but please note that an electric shock.
Use the designated parts must be connected to a power source.
※ Connector manufacturers: PHOENIX CONTACT
PartNo: MVSTBR 2,5 / 2-ST-5, 08 2P 5.00MM