HP StorageWorks 2.32 Edge Switch - Manual (Page 142)

SANtegrity Security Center 142
Access the SANtegrity Security Center by clicking the Security tab or F8 on the main window. In
order to use the Security Center, the user must have Security Administrator privilege. If not, the
Security tab is hidden.
Following is additional information about the components of the Security window:
• The upper left part of the Security window shows the Fabrics list. All discovered fabrics are listed
by their WWNs with their operational status icons on the left side.
• The upper right part of the Security window displays the main working area, where the security
administrator configures the authentication security settings. The main working area is divided
into two parts:
• The upper part is the Authentication Product Configuration table, which contains a summary
of security-related values for each switch in a fabric.
• The lower part is a tabbed pane containing a set of five tabs for completing security
configuration tasks.
• The lower left part of the Security window displays the server Master Log and the lower right part
of the window displays the Security Log.
• The Security tab and Security Log are only available to users with security administrator
privileges.
• Change the default size of the display by placing the cursor on the divider until a double arrow
displays. Click and drag the adjoining divider to resize the window. You can also show or hide
an area by clicking the left or right arrow on the divider.
• On the tool bar the Display By option and the Search Box option are disabled.