HP StorageWorks 2.32 Edge Switch - Manual (Page 191)

HA-Fabric Manager user guide 191
Management server
could not log you on.
Verify your username and
password.
An incorrect username or
password (both case
sensitive) was used while
attempting to log in to the
HAFM application.
Verify the username and password
with the customer’s network
administrator and retry the
operation.
Management server is
shutting down.
Connection will be
terminated.
The HAFM application is
closing and terminating
communication with the
attached product.
Reboot the HAFM appliance. If the
problem persists, contact the next
level of support.
Invalid character in field. An invalid character was
entered in the data field.
Remove invalid characters from the
entry.
Invalid name. One of the following
invalid names was used:
CON, AUX, COM1,
COM2, COM3, COM4,
COM5, COM6, COM7,
COM8, COM9, LPT1,
LPT2, LPT3, LPT4, LPT5,
LPT6, LPT7, LPT8, LPT9,
NUL, or PRN.
Choose a valid name and retry the
operation.
Invalid network address. The IP address specified
for the product is
unknown to the domain
name server (invalid).
Verify and enter a valid product IP
address.
Invalid port number.
Valid ports are
(0-< nn >).
You have specified an
invalid port number.
Specify a valid port number, in the
range 0 to the maximum number
of ports on the product minus 1.
For example, for a switch with
32 ports, the valid port range is
0–31.
Invalid product selection. At the New Product
dialog box, an invalid
product was selected.
Choose a valid product and retry
the operation.
Table 23 HAFM Messages (continued)
Message Description Action