HP StorageWorks 2.32 Edge Switch - Manual (Page 223)

HA-Fabric Manager user guide 223
The switch must be offline
to change the
Management Style.
The firmware is below the
required level and you
attempted to change the
management style.
Choose Set Online State from
the Maintenance menu and click
Set Offline. Then change the
management style. Set the director
or switch back online when
finished.
The switch must be offline
to configure.
A configuration changed
was attempted for a
configuration requiring
offline changes.
Take the appropriate actions to set
the director or switch offline before
attempting the configuration
change.
This feature is not
installed. Please contact
your sales representative.
This feature has not been
installed.
Contact your sales representative.
This feature key does not
include all of the features
currently installed and
cannot be activated while
the switch is online.
The feature set currently
installed for this system
contains features that are
not being installed with
the new feature key. To
activate the new feature
key, you must set the
switch offline. Activating
the new feature set,
however, will remove
current features not in the
new feature set.
Set the switch offline through the
Set Online State dialog box, then
activate the new feature key using
the Configure Feature Key dialog
box.
The new feature key will display
both the new features and the
features that were installed
previously.
This feature key does not
include all of the features
currently installed. Do
you want to continue with
feature key activation?
The feature set currently
installed for this system
contains features that are
not being installed with
the new feature key.
Click Yes to activate the feature
key and remove current features
not in the new feature set or No to
cancel.
Threshold alerts are not
supported on firmware
earlier than 01.03.00.
Threshold alerts are not
supported on firmware
earlier than 01.03.00.
Informational message.
Unable to change
incompatible firmware
release.
You tried to download a
firmware release that is
not compatible with the
current product
configuration.
Refer to the product release notes
or contact the next level of support
to report the problem.
Table 24 Element Manager Messages (continued)
Message Description Action