HP StorageWorks 2.32 Edge Switch - Manual (Page 193)

HA-Fabric Manager user guide 193
Invalid World Wide
Name or nickname.
The World Wide Name
or nickname that you
have specified is invalid.
The valid format for the
World Wide Name is
eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:xx:
xx:xx:xx). The valid
format for a nickname is
non blank characters, up
to 32 characters.
Try the operation again using a
valid World Wide Name or
nickname.
Invalid World Wide
Name. Valid WWN
format is: xx:xx:xx:xx:xx:
xx:xx:xx.
The specified World
Wide Name format is
invalid. The valid format
is eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:
xx:xx:xx:xx).
Retry the operation using a valid
WWN or nickname.
Invalid zone in zone set. The defined zone no
longer exists and is
invalid.
Delete the invalid zone from the
zone set.
Limit exceeded. You cannot add a new
product or user to HAFM
application if the
maximum number of that
resource already exists
on the system.
Delete unneeded products or users
from the system, before attempting
to add any new ones.
No address selected. You cannot complete the
operation because an
address has not been
selected.
Choose an address and retry the
operation.
No attached nodes
selected.
An operation was
attempted without an
attached node selected.
Choose an attached node and try
the operation again.
No management server
specified.
An HAFM appliance is
not defined to the HAFM
application.
At the HAFM 8 Log In dialog box,
type an appliance name in the
Server Name field and click
Login.
Table 23 HAFM Messages (continued)
Message Description Action