HP StorageWorks 2.32 Edge Switch User Manual
Page 199
HA-Fabric Manager user guide 199
This product is not
managed by this
management server.
The product selected is
not managed by this
HAFM appliance.
Choose a product managed by
this HAFM appliance or go to the
HAFM appliance that manages the
affected product.
This switch is currently
part of this fabric and
cannot be removed from
the Fabric Membership
List. Isolate the switch
from the fabric prior to
removing it from the
Fabric Membership List.
You attempted to remove
a switch from the Fabric
Membership List using the
Fabric Binding option,
but the switch is still part
of the fabric.
Remove the switch from the fabric
by setting the switch offline or
blocking the E_Port where the
switch is connected.
This World Wide Name
was not accepted. The
World Wide Name and
Domain ID must be
unique in the Fabric
Membership List.
You attempted to add a
detached switch to the
Fabric Membership List
through the Fabric
Binding option
(SANtegrity Binding
feature), but an entry
already exists in the
Fabric Membership List
with the same World
Wide Name (WWN).
Enter a unique World Wide Name
for the switch in the Add Detached
Switch dialog box.
Too many members
defined.
The maximum number of
zone members that can
be defined was reached.
Delete an existing zone member
before adding a new zone
member.
You do not have a
compatible version of the
management server
software. In order for the
HAFM application to
function properly, a
compatible version must
be installed on the client
machine. Click OK to
install a compatible
version.
The HAFM application
version running on the
HAFM appliance differs
from the version running
on the remote workstation
(client). A compatible
version must be
downloaded from the
HAFM appliance.
Download a compatible version of
the HAFM application to the
remote workstation (client) using
the Web install procedure.
You do not have rights to
perform this action.
Configured user rights do
not allow this operation
to be performed.
Verify user rights with the
customer’s network administrator
and change as required using the
Configure Users dialog box.
Table 23
HAFM Messages (continued)
Message
Description
Action