HP StorageWorks 2.32 Edge Switch - Manual (Page 210)

Informational and error messages 210
Director clock alert mode
must be cleared before
enabling period
synchronization.
Clock alert mode is
enabled through the
Configure FICON
Management Server
dialog box and you
attempted to enable
Periodic Date/Time
Synchronization through
the Configure Date and
Time dialog box.
Disable clock alert mode through
the Configure FICON
Management Server dialog box.
Director must be offline to
configure.
Clock alert mode is
enabled through the
Configure FICON
Management Server
dialog box and you
attempted to enable
Periodic Date/Time
Synchronization through
the Configure Date and
Time dialog box.
Disable clock alert mode through
the Configure FICON
Management Server dialog box.
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Fabric Binding is enabled
through HAFM and you
attempted to disable
Insistent Domain ID in the
Configure Switch
Parameters dialog box.
Click Yes if you want to continue
and disable Fabric Binding.
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Fabric Binding is enabled
through the HAFM and
user attempted to disable
Insistent Domain ID in the
Configure Switch
Parameters dialog box.
Click Yes if you want to continue
and disable Fabric Binding.
Disabling Switch Binding
will disable Enterprise
Fabric Mode. Do you
want to continue?
You attempted to disable
Switch Binding through
the Switch Binding State
Change dialog box, but
Enterprise Fabric Mode is
enabled.
Disable Enterprise Fabric Mode
through the Enterprise Fabric
Mode dialog box before disabling
Switch Binding.
Do you want to continue
with IPL?
This message requests
confirmation to initial
program load (IPL) the
director.
Click Yes to IPL the director or
Cancel to cancel the operation.
Table 24 Element Manager Messages (continued)
Message Description Action