HP StorageWorks 2.32 Edge Switch - Manual (Page 192)

Informational and error messages 192
Invalid request. Three conditions result in
this message:
• You tried to add or
modify a product
from Product View
and the network
address is already
in use. (Network
addresses must be
unique.)
• You tried to create
a new user with a
username that
already exists. (A
username must be
unique.)
• You tried to delete
the default
Administrator user.
(The default
Administrator user
cannot be deleted.)
Choose the action that is
appropriate to the activity that
caused the error:
• Network address: Specify a
unique network address for
the product.
• username: Specify a unique
username for the new user
ID.
• Do not delete the default
Administrator user.
Invalid UDP port number. The specified user
datagram protocol (UDP)
port number is invalid.
The number must be an
integer from 1 through
65535 inclusive.
Verify and enter a valid UDP port
number.
Invalid World Wide
Name.
The specified World
Wide Name format is
invalid. The valid format
is eight two-digit
hexadecimal numbers
separated by colons
(xx:xx:xx:xx:
xx:xx:xx:xx).
Enter a World Wide Name using
the correct format.
Table 23 HAFM Messages (continued)
Message Description Action