HP StorageWorks 2.32 Edge Switch - Manual (Page 148)

SANtegrity Security Center 148
1. Click Apply To.
The Apply to Other Products dialog box displays listing the qualified switches and directors.
Figure 90 Apply to Other Products dialog box
To be listed on this dialog, the following must be met:
• The switches and directors must be manageable.
• The Element Manager must manage one of the following models:
• A 16-port 1 gig or 2 gig Switch
• A 32-port 1 gig or 2 gig Switch
• A 64-port or 140-port Director
• The firmware must be 7.0 or later.
2. Click the check boxes next to the devices to which you want to apply the users.
3. Click OK.
Using the Security Change Confirmation and Status dialog box
Clicking OK on the Apply to Other Products dialog box or clicking Apply from the Users tab,
displays the Security Change Confirmation and Status dialog box. This dialog box is also a
status-monitoring dialog box that lets you know if the changes were successful.