HP StorageWorks 2.32 Edge Switch User Manual

Page 203

Advertising
background image

HA-Fabric Manager user guide 203

Cannot enable

beaconing while the

system light is on.

Occurs when choosing

Enable Beaconing option

for a failed FRU.

Replace FRU and enable

beaconing again or enable

beaconing on an operating FRU.

Cannot enable

beaconing while the

system error light is on.

Beaconing cannot be

enabled while the system

error light is on.

Select Clear System Error Light

from Product menu to clear error

light, then enable beaconing.

Cannot enable Open

Trunking while Enterprise

Fabric Mode is active

and the switch is offline.

Enterprise Fabric mode is

active and the switch or

director is online and you

attempted to enable

Open Trunking. This

message only displays if

the optional Open

Trunking feature is

installed.

Perform either of the following

steps:

Disable Enterprise Fabric

Mode option by selecting

the appropriate fabric in

the Fabric Tree portion of

the HAFM Manager

window (Fabrics tab) and

then selecting Enterprise

Fabric Mode from the

Fabrics menu. When the

Enterprise Fabric Mode

dialog box displays, click

Start and follow prompts

to disable the feature.

Set the switch or director

offline through the Set

Online State dialog box.

Display this dialog box by

selecting Set Online

State from the Element

Manager Maintenance

menu.

Cannot have E-Ports if

Management Style is

FICON unless SANtegrity

feature is installed. Please

contact your sales

representative.

Firmware is below the

required level and you

attempted to change

management style from

Open Systems to FICON

management style with

E_Ports configured, but

SANtegrity Binding is not

installed.

Informational message. If firmware

is below the required level and you

install SANtegrity Binding before

changing to FICON management

style, then E_Ports will remain as

E_Ports when you change to

FICON management style. If

SANtegrity Binding is not installed,

setting a director to FICON

management style will change all

E_ports to G_Ports.

Table 24

Element Manager Messages (continued)

Message

Description

Action

Advertising