HP StorageWorks 2.32 Edge Switch - Manual (Page 205)

HA-Fabric Manager user guide 205
Cannot retrieve
information for port.
Port information cannot
be retrieved by the
Element Manager
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Cannot retrieve port
configuration.
The port configuration
cannot be retrieved by
the Element Manager
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Cannot retrieve port
statistics.
Port statistics cannot be
retrieved by the Element
Manager because the
Ethernet link is down or
busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Cannot retrieve switch
date and time.
The director or switch
date and time cannot be
retrieved by the Element
Manager because the
Ethernet link is down or
busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Cannot retrieve switch
state.
The director or switch
state cannot be retrieved
by the Element Manager
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Cannot run diagnostics
on a port that is failed.
Port diagnostics
(loopback tests) cannot
be performed on a port
that has failed any
previous diagnostic
(power-on diagnostic,
online diagnostic, or
loopback test). The
amber LED associated
with the port illuminates
to indicate the failed
state.
Reset the port and perform
diagnostics again.
Cannot run diagnostics
on an active E-port.
Port diagnostics cannot
be performed on an
active E-port.
Run diagnostics on an E-port only
when it is not active.
Table 24 Element Manager Messages (continued)
Message Description Action