HP StorageWorks 2.32 Edge Switch - Manual (Page 215)

HA-Fabric Manager user guide 215
Invalid value for
BB_Credit.
At the Configure Fabric
Parameters dialog box,
the buffer-to-buffer credit
(BB_Credit) value must be
an integer from 1 through
60 inclusive.
Verify and enter a valid number
between 1 through 60.
Invalid value for Low BB
Credit threshold (1-99)
%.
The Low BB Credit
Threshold field in
Configure Open Trunking
dialog box must have
entries in the range from
1 and 99. This message
only displays if the
optional Open Trunking
feature is installed.
Enter a value from 1 to 99 into the
Low BB Credit Threshold field of
the Configure Open Trunking
dialog box.
Invalid value for day
(1-31).
At the Configure Date
and Time dialog box, the
DD value (day) must be
an integer from 1 through
31 inclusive.
Verify and enter a valid date.
Invalid value for
E_D_TOV.
At the Configure Fabric
Parameters dialog box,
the error detect time-out
value (E_D_TOV) must be
an integer from 2 through
600 inclusive.
Verify and enter a valid number.
Invalid value for hour
(0-23).
At the Configure Date
and Time dialog box, the
HH value (hour) must be
an integer from 0 through
23 inclusive.
Verify and enter a valid time.
Invalid value for minute
(0-59).
At the Configure Date
and Time dialog box, the
MM value (minute) must
be an integer from 0
through 59 inclusive.
Verify and enter a valid time.
Invalid value for month
(1-12).
At the Configure Date
and Time dialog box, the
MM value (month) must
be an integer from 1
through 12 inclusive.
Verify and enter a valid date.
Table 24 Element Manager Messages (continued)
Message Description Action