HP StorageWorks 2.32 Edge Switch - Manual (Page 196)

Informational and error messages 196
Selection is not a World
Wide Name.
The selection made is not
a World Wide Name.
Choose a valid World Wide
Name before performing this
operation.
Server shutting down. The HAFM application is
closing and terminating
communication with the
attached product.
Reboot the HAFM appliance. If the
problem persists, contact the next
level of support.
SNMP trap address not
defined.
If an SNMP community
name is defined, a
corresponding SNMP
trap recipient address
must also be defined.
Enter a corresponding SNMP trap
recipient address.
Switch is not managed by
HAFM.
The selected switch or
director is not managed
by the HAFM
application.
Choose a different switch or
director.
The Administrator user
cannot be deleted.
The administrator user is
permanent and cannot be
deleted from the
Configure Users dialog
box.
Informational message only—no
action is required.
The Domain ID was not
accepted. The World
Wide Name and Domain
ID must be unique in the
Fabric Membership List.
You attempted to add a
detached switch to the
Fabric Membership List
through the Fabric
Binding option
(SANtegrity Binding
feature), but a switch
already exists in the
fabric with the same
domain ID.
Enter a unique domain ID for the
switch in the Add Detached Switch
dialog box.
The management server
is busy processing a
request from another
Element Manager.
The HAFM appliance is
processing a request from
another instance of an
Element Manager and
cannot perform the
requested operation.
Wait until the process completes,
then perform the operation again.
The link to the managed
product is not available.
The Ethernet connection
between the HAFM
appliance and managed
product is down or
unavailable.
Establish and verify the network
connection.
Table 23 HAFM Messages (continued)
Message Description Action