HP StorageWorks 2.32 Edge Switch User Manual
Page 232
Configuring remote workstations
232
The Netscape browser opens.
3.
Obtain the HAFM appliance address from your network administrator.
4.
Enter the address of the HAFM appliance in the Location (or Address) box of the browser, and
press Enter.
The HP StorageWorks HAFM page appears.
5.
Read the instructions for your operating system.
6.
If a reference to fixes is made, click the hyperlink and verify that your system is up to date.
7.
On the HAFM page, click Begin HP-UX Installation/Begin AIX Installation /Begin
Linux Installation to begin the installation process.
8.
If you have read the security agreement information and wish to continue, click Yes.
The HP High Availability Fabric Manager Available Installers page appears (
9.
Click Download. The File Download dialog box appears (
).
10.
Click Open.
The system begins downloading the HAFM installer. When the download is complete, the
Introduction screen appears.
11.
A Save As dialog box appears with the default file name
hpClientInstall.bin
.
Change the file name to
/home/hpClientInstall.bin
.
Click OK.
The software download begins.
12.
Close the browser window.
13.
In the Terminal window:
a. Enter
cd home
.
b. Press Enter.
c. Enter
sh
hpClientInstall.bin
.
d. Press Enter.
14.
When the download is complete, the Introduction screen appears.
Be aware that there may be a considerable delay.
15.
Click Next. The License Agreement screen appears.
NOTE:
At any time, you may return to the previous page by clicking Previous or quit the Installation
by clicking Exit.
16.
If you have read the license agreement and agree to accept the terms, click I accept the
terms of the License Agreement.
17.
Click Next.
The Important Information screen appears.
18.
Click Next.
The Choose Install Folder screen
appears.