HP StorageWorks 2.32 Edge Switch User Manual

Page 195

Advertising
background image

HA-Fabric Manager user guide 195

Password and

confirmation don’t match.

Entries in the password

field and confirmation

password field do not

match. The entries are

case sensitive and must

be the same.

Enter the password and

confirmation password again.

Remote sessions are not

allowed from this network

address.

Only IP addresses of

remote workstations

specified at the Remote

Access dialog box are

allowed to connect to the

HAFM appliance.

Consult with the customer’s

network administrator to determine

if the IP address is to be configured

for remote sessions.

Remote session support

has been disabled.

The connection between

the specified remote

workstation and the

HAFM appliance was

disallowed.

Consult with the customer’s

network administrator to determine

if the workstation entry should be

modified at the Remote Access

dialog box.

Resource is unavailable.

The specified operation

cannot be performed

because the product is

unavailable.

Verify the HAFM

appliance-to-product link is up. If

the link is up, the HAFM appliance

may be busy. Try the operation

again later.

Route data corrupted.

The information for this

route is corrupt.

Try the operation again. If the

problem persists, contact the next

level of support.

Route request timeout.

The Show Route request

timed out.

Try the operation again. If the

problem persists, contact the next

level of support.

Routing is not supported

by the switch.

This switch or director

does not support the

Show Routes feature.

Choose a different switch or

director to show the route.

SANtegrity Feature not

installed. Please contact

your sales representative.

You selected Fabric

Binding or Enterprise

Fabric Mode from the

Fabrics menu. These

selections are not

enabled because the

optional SANtegrity

binding feature is not

installed.

Install the SANtegrity Binding

feature to use Fabric Binding or

enable Enterprise Fabric Mode.

Select alias to add to

zone.

An alias was not selected

before clicking Add.

Choose an alias before clicking

Add.

Table 23

HAFM Messages (continued)

Message

Description

Action

Advertising