HP StorageWorks 2.32 Edge Switch - Manual (Page 149)

HA-Fabric Manager user guide 149
Figure 91 Security Change Confirmation and Status dialog box
The Security Change Confirmation and Status dialog box includes the user ID who initiated the
changes, the time that the changes were planned, the Server ID from which the changes are
populated, and all the affected switches and directors. Server ID is identified by its server name plus
IP address.
The Detailed Changes table includes all the individual configurations that the security administrator
made on the Users tab. The columns of this table vary depending on from which tab the security
administrator is accessing the confirmation information.
If there is only one product to which changes need to be applied, only that product is listed. The
product ID is identified by its Node name. By default, this product is highlighted and selected.
If you applied the same user settings to multiple products, the product list displays multiple product
names that were selected from the Apply To dialog box. By default, the product that was selected
from the top table for configuration is highlighted. The content of the Detailed Changes table
changes as you click through different products from the product list.
The differences between the to-be-populated settings and current settings on each individual product
are displayed, because the Apply To dialog box takes changes made on user settings for one
product, and generalizes them to multiple products whose user settings can be totally different. The
new settings replace the existing settings on other products.