Document Outline

• Compaq ProLiant DL760 Servers User Guide
• Notice
• Contents
• About This Guide
  • Purpose and Scope
  • Important Safety Information
  • Text Conventions
  • Symbols in Text
  • Symbols on Equipment
  • Rack Stability
  • Access Panel Label and Indicators
  • Getting Help
    • Compaq Technical Support
    • Compaq Website
    • Compaq Authorized Reseller
    • Related References
• Chapter 1: Server Features
  • Compaq ProLiant DL760 Servers
  • Server Components
  • New Technology
    • PCI-X Support
    • Compaq ROM-Based Setup Utility Support
    • Faster Processor Support
  • Standard Features
    • Processor and Redundant Processor Power Modules
    • System Memory
    • Cache Accelerator
    • Expansion Slots
    • Network Controller
    • PCI Hot Plug
    • Disk Controller
    • Internal Hot-Plug Drive Bays
    • Fixed Internal Media Drive Bays
    • Video
    • Redundant Hot-Plug Power Supplies
    • Redundant Hot-Plug Fan
    • Supported Interfaces
  • Optional Features
  • Server Configuration and Management Features
    • Compaq SmartStart
    • Compaq ROM-Based Setup Utility
    • Compaq Remote-Flash Redundant ROM
    • Microsoft Windows 2000 Utilities
    • Microsoft Windows NT Utilities
    • Novell NetWare Utilities
    • SCO UnixWare Utilities
    • Compaq Insight Manager/Insight Manager XE
  • Compaq Web-Enabled Server Management
    • Compaq Integrated Management Log
    • Compaq Integrated Management Display
  • Diagnostic Tools
  • Security Features
    • Software Security
    • Hardware Security
  • Routine Maintenance
  • Warranty
• Chapter 2: Installing the Server in a Rack
  • Rack Installation Overview
  • Selecting a Site
    • Space Requirements
    • Power Requirements
      • Power Supplies
      • System Power Management Guidelines
    • Grounding Requirements
    • Temperature Requirements
    • Airflow Requirements
      • High Airflow Rack Door Insert
  • Shipping Box Contents
  • Removing the Shipping Safeguards
  • Install any Expansion Boards or Optional Features
  • Rack Warnings and Precautions
  • Server Warnings and Precautions
  • Installing the Server in a Rack
    • Lightening the Chassis
    • Attaching the Inner Slide Rails to the Server
    • Attaching the Outer Slide Rail Assemblyto the Rack
      • Marking the Rack with the Template
      • Inserting Cage Nuts into the Rack Frame
      • Installing the Outer Slide Rail Assemblyinto the Rack
    • Sliding the Server into the Rack
    • Attaching the Cable Management Assembly
      • Installing the Cable Management Arm Bracket
      • Installing the Cable Management Arm
• Chapter 3: Server Access
  • Server Access Panel and Modules
    • Accessing the I/O Module
    • Removing the I/O Module
    • Removing the Processor and Memory Module
    • Processor Serial Number
    • Removing the Media Module
    • Media Module Components
• Chapter 4: Installing Hardware Options - Server Power Off
  • Installing a Pentium III Xeon Processor and Processor Power Module
  • Installing the Cache Accelerator
  • Dual Inline Memory Modules (DIMMs)
    • Adding or Replacing Memory
  • External Storage Devices
  • Non-Hot-Plug I/O Expansion Boards
    • Locating the I/O Expansion Slots
    • PCI-X and PCI Bus Distribution Guidelines
    • Adding Non-Hot-Plug Expansion Boards
  • Installing the Remote Insight Lights-Out Edition
  • Installing the Integrated Array Bypass
• Chapter 5: Installing Hardware Options - Hot Pluggable
  • Mass Storage
    • SCSI Hard Drive Installation Guidelines
    • Installing a Hot-Plug SCSI Hard Disk Drive
    • Removing a Hot Plug SCSI Hard Disk Drive
      • Hot-Plug SCSI Hard Drive LED Indicators
      • Important Guidelines About Replacing Hot-Plug SCSI Hard Drives
  • Installing a Hot-Plug Power Supply
  • PCI Hot-Plug I/O Expansion Boards
    • Locating the I/O Expansion Slots
    • PCI Hot Plug LED Indicators
    • PCI Hot Plug Operating System Support
      • Microsoft Windows 2000
      • Microsoft Windows NT 4.0
      • Novell NetWare
      • SCO UnixWare
    • PCI-X and PCI Bus Distribution Guidelines
    • Adding PCI Hot Plug Expansion Boards
    • Removing or Replacing a PCI Hot PlugExpansion Board
  • Replacing Hot-Plug Fans
• Chapter 6: Cabling the Server
  • Cabling the Server
• Chapter 7: Server Power
  • System Power
    • Power Supply LED Indicators
    • Power Supplies
  • System Interconnect StatusLED Indicators
  • Powering Up the Server
    • Integrated Management Display
  • Powering Down the Server
• Chapter 8: Configuring the Server
  • Setting Up the SCSI Array
    • Features
    • Option ROM-Based Array Configuration Utility
    • Array Configuration Utility
    • Starting the Compaq Array Configuration Utility
      • Online Help
      • Capacity Expansion
      • RAID Level and Stripe Size Migration
    • Errors and Warnings
    • Alternate Sources of the Array Configuration Utility
      • Running ACU from within the Operating System
      • Running ACU from the SmartStart and Support Software CD
  • Installing the Operating System
    • Compaq ROM-Based Setup Utility
    • Operating System—Purchased Separately
    • Operating System—Factory Installed
• Chapter 9: Integrated Management Log
  • Multiple Ways of Viewing the Log
  • Integrated Management Display
    • Configuring the Integrated Management Display
      • Setting up with the ROM-Based Setup Utility
      • Setting up with the Compaq Integrated Management Display Utility
    • Customizing Management Display Fields
      • Idle Screen Text
      • Custom Menu Item
      • Custom Menu Screen
      • Server Information
      • Administrator Information
      • Service Information
    • Standard Integrated Management Display Fields
      • System Information
  • Navigating the Menus
    • Normal Run-time Behavior
    • Display Symbols
    • Navigation
    • System Behavior with Error Events
    • Menu Structure
      • Events
      • Administration Information
      • System Information
      • Contrast
      • Other Info
  • Compaq Insight Manager
    • Viewing the Event List
    • Printing the Event List
  • Compaq Survey Utility
• Appendix A: Regulatory Compliance Notices
  • Regulatory Compliance Identification Numbers
  • Federal Communications Commission Notice
    • Class A Equipment
      • Declaration of Conformity for Products Marked with the FCC logo – United States Only
    • Modifications
    • Cables
  • Canadian Notice (Avis Canadien)
    • Class A Equipment
  • Mouse Compliance Statement
  • European Union Notice
  • Japanese Notice
  • Taiwanese Notice
  • Laser Devices
    • Laser Safety Warnings
    • Compliance with CDRH Regulations
    • Compliance with International Regulations
    • Laser Product Label
    • Laser Information
  • Power Cords
  • Battery Replacement Notice
• Appendix B: Electrostatic Discharge
  • Grounding Methods
• Appendix C: Server Error Messages
  • POST Error Messages
  • ADU Error Messages
• Appendix D: LED Indicators and Switches
  • LED Indicators
    • System LED Indicator
    • Auxiliary Power LED Indicator
    • System Interconnect Status LED Indicators
    • Hot-Plug SCSI Hard Drive LED Indicators
    • Power Supply LED Indicators
    • Hot-Plug Fan LED Indicators
    • PCI Hot Plug LED Indicators
  • Switches
    • Processor Board Switches
    • Processor Board Bus/Core Frequency Ratio
    • I/O Board Switches
• Appendix E: Troubleshooting Information
  • When the Server Does Not Start
  • Diagnosis Steps
  • Problems After Initial Boot
    • Compaq Remote-Flash Redundant ROM
• Appendix F: Server Specifications
• Appendix G: System Battery
  • Internal Battery
• Index