Allied Telesis AT-8100 Series - Manual (Page 1292)

Chapter 79: LLDP and LLDP-MED Commands
1292
NO LLDP MED-NOTIFICATIONS
Syntax
no lldp med-notifications
Parameters
None
Mode
Port Interface mode
Description
Use this command to configure the switch not to send LLDP-MED
topology change notifications when devices are connected to or
disconnected from the specified ports.
Confirmation Command
“SHOW LLDP INTERFACE” on page 1303
Example
This example configures the switch not to send LLDP-MED topology
change notifications when devices are connected to or removed from port
19:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.19
awplus(config-if)# no lldp med-notifications